How to Flash Tecno Camon 12, Camon 12 Pro
|Download SP Flash Tool
To use SP Flash Tool on Tecno Camon 12 or 12 Pro after Download, Simply:
- Now extract the stock ROM you downloaded and go back to SP flash tool.
- Next click on scatter-loading button on the SP flash tool and you need to go to the stock ROM folder you extracted.
- You will see a scatter file in there, double click on it to select it (it will look like MT6572_Android_scatter). The number may be different.
- Uncheck preloader (this is not required unless the device is completely dead.
- And also make sure you untick DSP_BL if found on the list that will be shown in the SP flash tools.
- You will need to click the Download button and power off the Tecno Camon 12 or 12 Pro, remove the battery ( if the battery is inbuilt power off the phone and waits for 10 minutes).
- Connect the device to the computer with the USB and wait for the SP flash tool to detect it.
- Immediately the Tecno Camon 12 or 12 Pro has been detected a red line will be at the bottom then followed by a yellow line.
- Once the flashing is done or completed you will see a big green tick shown on the screen.
- At this point you can now power on the Tecno Camon 12 or 12 Pro and wait for it to boot, it might take minutes if it does not boot up then remove the battery, if it’s an inbuilt battery, press the power button for 15 seconds and the Tecno Camon 12 or 12 Pro will power off or restart.
3 Comments
Thanks for the tutorial.. Please can I get a stock rom for Camon 12 cc7?
Thanks in advance for your help
I DON THINK THE FIRMWARE FILE IS AVAILABLE YET
The file is very much available for download via the step 4 of this post.