Stay informed, visit our spot for tech, breaking news and in-depth coverage today.

TheupspotDon't miss out

How to Flash Sonim XP8 with Flash Tool, Firmware or Stock ROM

Earlier on when Sonim XP8 was released we published a post to show our readers the features, specifications and price of this most adorable Sonim device called XP8. As well as how you can perform a hard or soft reset when your XP8 becomes unresponsive or should you choose to give to someone else with no data in it.



Usually, a hard or soft reset with the guide provided for Sonim XP8 is supposed to fix any possible software issue you might be experiencing with your Sonim XP8 or other similar android devices that the quick fixing guide for issues like camera, Bluetooth, SIM, Wi-Fi, YouTube or other malfunction could solve. But if you have tried that already and it failed then, you should probably opt-in for formatting in this case I will show you how to use QFIL Flash Tool to format your XP8.



Just before you follow the tips below to upgrade or downgrade your Sonim XP8. Do a backup of your personal data (if you can) before flashing:

Steps on how to flash Sonim XP8 with QFIL Flash Tool:

First of all, visit our Firmware page and download the flash file for your:

  • Sonim XP8
  • Note: You will need to place your phone on charge with a working charger till you are sure it has charged above 50 percent before your formatting process commences else your phone might not wake up even after formatting.
  • Next, you will have to follow the instruction of using a QFIL Flash Tool as explained here below.

Step 1: Download and install USB drivers on Your PC for Sonim XP8.

Step 2: Or you download and install USB drivers (Preferable) from here if any.

Step 3: Download QFIL Flash tool (latest version is preferable) from here.

Step 4: Download the stock ROM or Firmware of the Sonim XP8 you want to flash.

Step 5: Extract QFIL flash Tool and open the folder, now run (launch) the QFIL flash tool as administrator.

Step 6: Now extract the stock ROM or Firmware you downloaded and go back to QFIL flash tool.

Step 7: Turn off your Sonim XP8

Step 8: Now, you will have to press and hold down the Volume UP  and Power Button simultaneously.

Step 9: You Connect your Sonim XP8 to your PC with a good working USB cable.

Step 10: Now, using the QFIL flash tool. Browse to locate the flash file and click on the download button.

 

Step 11: After the above step the flashing will start on your Sonim XP8.

Step 12: The process should take around 10 to 15 minutes to complete. Be patient and wait till you see Flashing Completed.

Step 13: After the above your Sonim XP8 will reboot automatically.

Step 14: That’s all. Disconnect your Sonim XP8 and enjoy.

Tips to Remember:

  • This update is meant for Sonim XP8 users only.
  • THEUPSPOT is in no way responsible for any damage you might have on your Sonim XP8 while installing the update.
  • The usual upgrade steps require the use of a PC or Laptop to carry out the firmware flashing.
  • Ensure that you have updated and working USB drivers installed.
One Comment

Add a Comment

Your email address will not be published.

Theupspot