Tecno Spark 3, Spark Go Quick Fixing Guide for Camera, Bluetooth, SIM, Wi-Fi, YouTube and Other Issues

The
specifications and features of Tecno Spark 3, Spark Go says a lot of how
incredibly awesome the device will always be in the hands of people who desire
to live a smarter life in this digital age where everything is going mobile.
The Spark 3, Spark Go is one of the leading smartphone devices out there that
makes it possible for users to be able to do this or that at anywhere or
anytime which is exactly what the word mobile stands for. But
from THEUPSPOT we see the Tecno Spark 3, Spark Go like other devices
out there that isn’t 100% exempted from having issues as time goes on because
its mere hardware (body) well designed with coded instructions to make it
usable (spirit and soul).

 Note: After trying the Tecno Spark 3, Spark
Go quick fixing steps for any of the mentioned issues below you might want to
consider doing a hard or soft reset or our guide on how to flash TecnoSpark 3, Spark Go back to its factory state when you purchased it.

 

Below Are Some Issues and Fixing You Can Apply to Your Tecno
Spark 3, Spark Go Device:

1.       Camera failure – can’t connect
to camera fixing on Spark 3, Spark Go

2.       Unfortunately, YouTube has
stopped working on Tecno Spark 3, Spark Go

3.       Wi-Fi connection issue and
fixing on Spark 3, Spark Go

4.       Bluetooth connection issue on Spark
3, Spark Go

5.       SIM Issue on Tecno Spark 3,
Spark Go

6.       Performance Issues on Tecno Spark
3, Spark Go

7.       SD Card not detected on Tecno Spark
3, Spark Go

8.       Battery drains fast and charge
slowing on Tecno Spark 3, Spark Go

9.       Overheating Issue on Tecno Spark
3, Spark Go

10.   Touchscreen not responding on Tecno Spark
3, Spark Go

11.   Earpiece Sounds Robotic on Spark
3, Spark Go

#1 – Camera failure – can’t connect to camera

A
camera is one of the major thing users check for in Tecno smartphones or other
related devices when they want to buy a new or even a used phone. Recently,
we’ve seen a tremendous upgrade in the cameras of newly released Tecno (Spark
3, Spark Go) phones and devices from other manufacturers which simply means the
camera is one of the most valuable assets of Tecno Spark 3, Spark Go and other
devices.

However,
as an experienced smartphone technician who has fixed several Tecno devices
ranging from software to hardware issues. I have come across several cases of
camera malfunction both in Tecno (Spark 3, Spark Go) and other leading brands
devices which is why I have written this post on how to troubleshoot and fix
this issue in six different ways.

So, if
you are having issues with your new or old Tecno Spark 3, Spark Go smartphone
camera? You’re unable to snap pictures, the app shows failure or error notice?
Here are six possible ways to that might fix the camera issue of Tecno Spark 3,
Spark Go device. But please do not disassemble your Spark 3, Spark Go phone if
it is still under the warranty period else you won’t be eligible to request a
replacement or free fixing that the warranty covers.

·         Unmount the SD Card inserted in
your Spark 3, Spark Go or Replace it with a new one.

·         Check the Camera module of your
Spark 3, Spark Go and make sure it I not loose. Tighten up loosed screws if
possible.

·         Tap the Tecno Spark 3, Spark Go
camera like two to three times.

·         Perform a factory reset to see
if it will fix your Tecno Spark 3, Spark Go device.

·         Change the Spark 3, Spark Go
Camera Module. You can place an order for one from any of the leading online
stores like Amazon or eBay.

·         Still can’t fix the Spark 3,
Spark Go camera failure with the previous tips. Then, send your Tecno Spark 3,
Spark Go back to the supplier for repair if it is still under warranty. Else,
look for a smartphone technician.

#2 – Unfortunately, YouTube has stopped working on Tecno Spark
3, Spark Go

There
is nothing or little you can do when your Tecno Spark 3, Spark Go becomes
unresponsive due to error which shows a notice that “Unfortunately, YouTube has
stopped working” which rarely occurs in Tecno devices. You probably won’t be
able to run and or use any other application. When you try to launch or use
other application in that Tecno Spark 3, Spark Go it will pop up a screen that
shows you the errors notice with no other option other than to press OK to
dismiss that notice.

·         
Reboot your Spark 3, Spark Go and quickly navigate to.

·         
Settings >> Apps >> All Programs >> YouTube

·         
Re-Enable the app and that should solve your Spark 3, Spark Go
problem.

·         
Or try uninstalling, reinstalling and updated the YouTube
application you have installed.

#3 – Wi-Fi connection issue and fixing on Tecno Spark 3,
Spark Go

·         Go to your Spark 3, Spark Go
settings and press the connection option.

·         Next, press the Wi-Fi option.

·         Now, your Tecno Spark 3, Spark
Go will auto scan for nearby networks to join and will show them on the screen.

·         After the first scan ends, tap
for a few seconds on the Wi-Fi you want to connect and press the forget option.

·         Again, tap that same network
and input the authentication details and save it. Although, open networks don’t
require any password for access.

·         Be sure to confirm that your
connection from your network service provider is OK and your router, if that is
what you are using, is working perfectly.

#4 – Bluetooth connection issue and fixing on Tecno Spark
3, Spark Go

·         Put off your Tecno Spark 3,
Spark Go and reboot it again to see if that will automatically solve the
problem.

·         Clear the list of devices
already added and re-add the device you want to pair with.

·         Check to be sure that your Spark
3, Spark Go Bluetooth is set to discoverable. So, other devices can see it and
be able to connect to it.

·         Check your Spark 3, Spark Go
power section to make sure it wasn’t set to power saving mode.

·         Try clearing the Bluetooth data
and or cache to see if it will fix it.

·         Reboot your Tecno Spark 3,
Spark Go again.

·         If all the other options still
do not fix it. Then, you might need to try a factory reset.

#5 – SIM Issue and fixing on Tecno Spark 3, Spark Go

  • Confirm that your SIM is working
    properly by trying it on another device.
  • Check to see that you have inserted
    SIM to your Spark 3, Spark Go correctly.
  • Check see that your SIM tray is not
    damaged.
  • If the SIM is too old, then go for a
    SIM swap before you use it in your Tecno Spark 3, Spark Go new device.
  • Make sure there are no compatibility
    issues related to the frequency
  • If the problem still persists, hand
    your Spark 3, Spark Go over to a technician for a proper check.

#6 – Performance Issues and fixing on Tecno Spark 3, Spark
Go

  • Check to see if your Spark 3, Spark Go
    storage filled. It comes with large ROM by default and if you fill it
    completely, of course, it will put some burden on the processor and on the
    RAM which could lead to this problem
  • Check to see if there is a virus
    piloting the issue.
  • Update all apps running on your Tecno Spark
    3, Spark Go
  • Avoid using your Spark 3, Spark Go
    while charging
  • Remove all the third-party apps you
    installed

#7 – SD Card not detected and fixing on Tecno Spark 3,
Spark Go

  • First of all, make sure your card is
    under 32GB. In case you too are facing them, the methods below can help
    you to keep up the pace. GB which is the upper limit on using an SD card
    on this device.
  • Confirm that your microSD card is
    compatible with the device
  • Take off and reinsert the SD card
    again after restarting the device
  • Try to format the SD card with a
    system and reinsert it in your Spark 3, Spark Go.
  • Try that Card on another device and
    try other SD card in your Tecno Spark 3, Spark Go to be able to isolate
    the issue.
  • Confirm that your SD card slot is not
    damaged.

#8 – Battery drains fast and charge slowing and fixing on Tecno
Spark 3, Spark Go

  • Make sure your Tecno Spark 3, Spark Go
    has all the latest updates installed.
  • Sometimes it could be due to the
    memory card also. Remove it and see if the problem is gone
  • Make sure you using the authorized
    charger or similar charger to the one that came with your Spark 3, Spark
    Go.
  • Turn off the unwanted notifications as
    they always consume extra battery
  • Put off Wi-Fi, Bluetooth when they are
    not in use
  • Ensure that the battery is not
    physically damaged
  • Ensure there’s not any lint, dust, or
    debris in the charging port.
  • Impose a strict upper limit on the
    data and screen issue
  • Make sure you using the brightness
    level as per the recommended level
  • Keep the display off when not in use.
  • Ensure you charge your Spark 3, Spark
    Go battery only after consuming all the juice in it
  • Take off your Spark 3, Spark Go case
    to ensure a better charger connection.
  • Check to see if all apps are
    up-to-date. If not, update them immediately
  • If your Tecno Spark 3, Spark Go
    battery is draining too quickly, the most common factor is the
    installation of third-party apps. As already mentioned, you need to
    disable it by taking your phone into the safe mode.
  • Ensure that apps and features are
    closed when not in use

#9 – Overheating Issue and fixing on Tecno Spark 3, Spark
Go

  • Remove the apps which you downloaded
    just before when the issue was noticed.
  • Avoid multitasking if the tasks are
    bulky and time-consuming
  • Don’t use any other charger than the
    one which comes with your Spark 3, Spark Go
  • Keep the brightness under control.
    Light emitting screen also emits heat in the equal amount
  • Ensure there is no extra burden on RAM
    due to any reason and the processor. They release a lot of heat while
    performing their task
  • Ensure all the accessories you connect
    with your device and genuine and authorized
  • Clear app data and or cache and see if
    the problem is fixed.
  • Make sure the output of the power bank
    is as per the device needs if you use the same
  • Update your Spark 3, Spark Go to the
    latest version if you haven’t
  • Ensure the problem is not there due to
    the carry case you installed on your phone

#10 – Touchscreen not responding and fixing on Tecno Spark
3, Spark Go

  • First of all, try a reboot of your Tecno
    Spark 3, Spark Go
  • Download and install any pending
    update on your Spark 3, Spark Go.
  • There could be a software problem in
    some cases and the touch screen is unable to perform its tasks
  • Screen issues are often mistaken with
    other issues. so, you need to be careful about this
  • See if the battery is having some
    juice in it when you try to turn your device or and it doesn’t respond
  • Ensure you are not wearing mittens or
    gloves while using your device
  • Clean the screen and make sure there
    are no oil or dust particles
  • Watch closely to see I if the screen
    physically damaged
  • Ensure there is no liquid damage
    caused to the screen
  • Remove the screen protectors and see
    if the issue is gone. Of course, the problem could be due to this reason
    also
  • Last option is to perform a factory
    restore.
  • If the issue is still there, you need
    to contact the support

#11 – Earpiece Sounds Robotic and fixing on Spark 3, Spark
Go

  • Try another good earpiece for doing a
    phone call.
  • When on a phone call press the volume
    up button to make the sound louder.
  • This will help to make the other
    person more audible and will not remove the robotic tone of hands-free.

We
hope this was helpful you. Please click our like button below or share if you
find this post helpful.

Tags:

Add a Comment

Your email address will not be published. Required fields are marked *