How to Flash Wiko Ufeel, Ufeel fab or go

Earlier on when Wiko Ufeel, Ufeel fab or go was released we published a post to show our readers the features, specifications and price of this most adorable Wiko device called Ufeel, Ufeel fab or go. As well as how you can perform a hard or soft reset when your Ufeel, Ufeel fab or go becomes unresponsive or should you choose to give to someone else with no data in it.

Usually, a hard or soft reset with the guide provided for Wiko Ufeel, Ufeel fab or go is supposed to fix any possible software issue you might be experiencing with your Wiko Ufeel, Ufeel fab or go or other similar android devices that the quick fixing guide for issues like camera, Bluetooth, SIM, Wi-Fi, YouTube or other malfunction could solve. But if you have tried that already and it failed then, you should probably opt-in for formatting in this case I will show you how to use SP Flash Tool to format your Ufeel, Ufeel fab or go.

Steps on how to flash Wiko Ufeel, Ufeel fab or go with SP Flash Tool:

·         Download the stock ROM of Wiko Ufeel, Ufeel fab or go.

·         As usual you need to place your phone on charge till it is charged not less than 50 percent before you process else you phone might not wake up even after formatting.

·         Next you will have to follow the instruction of using a Smart Phone Flash Tool as explained here.

Stock Firmware

·         Stock Firmware flashing can be applied to Unbrick your Wiko Ufeel, Ufeel fab or go

·         Stock ROM flashing can be applied to fix Bootloop issues.

·         Stock Firmware flashing can be applied to either upgrade or downgrade your Wiko Ufeel, Ufeel fab or go

·         It can be applied to unroot or fix bugs on your Wiko Ufeel, Ufeel fab or go.

·         To fix stutter or lag on your Wiko Ufeel, Ufeel fab or go

·         Stock firmware flashing is effective in solving software issues of Wiko Ufeel, Ufeel fab or go.

·         Stock firmware flashing can be applied to revert back to the stock of your Wiko Ufeel, Ufeel fab or go to gain your warranty.

Tips to Remember:

i.                     This update is meant for Wiko Ufeel, Ufeel fab or go users only.

ii.                   Be sure to try the other method of installing stock firmware if yours have unlocked Bootloader issue.

iii.                 TWRP Recovery is a good alternative on how to upgrade your device if you don’t want to do it the normal way. Here is a post on TWRP Recovery.

iv.                 THEUPSPOT is in no way responsible for any damage you might have on your Wiko Ufeel, Ufeel fab or go while installing the update.

v.                   The usual upgrade steps require the use of PC or Laptop to carry out the firmware flashing.

vi.                 Ensure that you have an updated and working USB drivers installed.

vii.                Finally, just before your go on with the upgrade or downgrade, do a backup of your Wiko Ufeel, Ufeel fab or go if possible.