How to Flash Alcatel 3 or 3c with Flash Tool, Firmware or Stock ROM

Earlier on when Alcatel 3 or 3c was released, we published a post to show our readers the features, specifications, and price of this most adorable Alcatel device called 3 or 3c. As well as how you can perform a hard or soft reset when your 3 or 3c becomes unresponsive or should you choose to give to someone else with no data in it.

Usually, a hard or soft reset with the guide provided for Alcatel 3 or 3c is supposed to fix any possible software issue you might be experiencing with your Alcatel 3 or 3c or other similar android devices that the quick fixing guide for issues like camera, Bluetooth, SIM, Wi-Fi, YouTube or other malfunction could solve. But if you have tried that already and it failed then, you should probably opt-in for formatting, in this case, I will show you how to use SP Flash Tool to format your 3 or 3c.

Just before you follow the tips below to upgrade or downgrade your Alcatel 3 or 3c. Do a backup of your personal data (if you can) before flashing:

• Use QFIL Flash Tool for Alcatel 3 and SP Flash Tool on Alcatel 3c
• Setup an auto or carry out a manual backup regularly of your Alcatel 3 or 3c following our guide here with data or Wi-Fi connection.
• You can also backup your Alcatel 3 or 3c offline – without internet connection following the steps provided here.

Steps on how to flash Alcatel 3 or 3c with QFIL Flash Tool:

First of all, visit our Firmware page and download the flash file for your:

• Alcatel 3 or 3c
• Note: You will need to place your phone on charge with a working charger till you are sure it has charged above 50 percent before your formatting process commences else your phone might not wake up even after formatting.
• Next, you will have to follow the instruction of using a QFIL Flash Tool as explained here below.

Step 1: Download and install USB drivers on Your PC for Alcatel 3 or 3c.

Step 2: Or you download and install USB drivers (Preferable) from here.

Step 3: Download QFIL Flash tool (latest version is preferable) from here.

Step 4: Download the stock ROM or Firmware of the Alcatel 3 or 3c you want to flash.

Step 5: Extract QFIL flash Tool and open the folder, now run (launch) the QFIL flash tool as administrator.

Step 6: Now extract the stock ROM or Firmware you downloaded and go back to QFIL flash tool.

Step 7: Turn off your Alcatel 3 or 3c

Step 8: Now, you will have to press and hold down the Volume UP  and Power Button simultaneously.

Step 9: You Connect your Alcatel 3 or 3c to your PC with a good working USB cable.

Step 10: Now, using the QFIL flash tool. Browse to locate the flash file and click on the download button.

 

Step 11: After the above step the flashing will start on your Alcatel 3 or 3c.

Step 12: The process should take around 10 to 15 minutes to complete. Be patient and wait till you see Flashing Completed.

Step 13: After the above your Alcatel 3 or 3c will reboot automatically.

Step 14: That’s all. Disconnect your Alcatel 3 or 3c and enjoy.

Tips to Remember:

• This update is meant for Alcatel 3 or 3c users only.
• THEUPSPOT is in no way responsible for any damage you might have on your Alcatel 3 or 3c while installing the update.

• The usual upgrade steps require the use of a PC or Laptop to carry out the firmware flashing.

• Ensure that you have updated and working USB drivers installed.