Earlier on when Infinix S5 PRO, S5 PRO
(16+32), S5 PRO (48+40) was released we published a post to show our readers
the features, specifications and price of this most adorable Samsung device
called Galaxy S5 PRO, S5 PRO (16+32), S5 PRO (48+40). As well as how you can
perform a hard or soft reset when your Galaxy S5 PRO, S5 PRO (16+32), S5 PRO
(48+40) becomes unresponsive or should you choose to give to someone else with
no data in it.

 

Usually, a hard or soft reset with the guide provided for Infinix S5 PRO, S5 PRO (16+32), S5PRO (48+40) is supposed to fix any possible software issue you might be
experiencing with your Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40) or other
similar android devices that the quick fixing guide for issues like camera, Bluetooth, SIM, Wi-Fi, YouTube or other malfunction could solve. But if you have tried that already and it failed then, you
should probably opt-in for formatting in this case I will show you how to use Android
Flash Tool to format your Galaxy S5 PRO, S5 PRO (16+32), S5 PRO (48+40).

 

Steps on how to flash Infinix S5 PRO, S5 PRO (16+32), S5
PRO (48+40) with A Flash Tool:

Step 1: Download and
install MTK drivers.

 

Step 2: Or you download
and install MT65XX VCOM drivers (Preferable) from here.

 

Step 3: Download SP
Flash tool (latest version is preferable) from here.

 

Step 4: Download the
stock ROM of the device you want to flash or unbrick from here.

 

Step 5: Extract SP
flash Tool and open the folder, now run the SP flash tool as administrator.

 

Step 6: Now extract the
stock ROM you downloaded and go back to SP flash tool.

 

Step 7: Now click on
scatter-loading button on the SP flash tool and you need to go to the stock ROM
folder you extracted.

 

Step 8: You will see a
scatter file in there, double click on it to select it (it will look like
MT6572_Android_scatter). The number may be different.

 

Step 9: Now untick
preloader (this is not required unless the device is completely dead.

 

Step 10: And also make
sure you untick DSP_BL if found on the list that will be shown in the SP flash
tools.

 

Step 11: Now you need
to click the Download button and power off the device, remove the battery ( if
the battery is inbuilt power off the phone and waits for 10 minutes).

 

Step 12: Now connect
the device to the computer with the USB and wait for the SP flash tool to
detect it.

 

Step 13: Immediately
the phone has been detected a red line will be at the bottom then followed by a
yellow line.

 

Step 14: After the
flashing is done or completed you will see a big green tick shown on the
screen.

 

Step 15: Now power on
the phone and wait for it to boot, it might take minutes if it does not
boot up then remove the battery, if it’s an inbuilt battery, press the power
button for 15 seconds and the phone will power off or restart. 

·        
Download
the stock ROM of Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40).

·        
As usual you need to place your
phone on charge till it is charged not less than 50 percent before you process
else you phone might not wake up even after formatting.

·        
Next you will have to follow
the instruction of using a Firmware
Flashing or Upgrade Tool as explainedhere.

 

Stock Firmware

·        
Stock Firmware flashing can be
applied to Unbrick your Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40)

·        
Stock ROM flashing can be
applied to fix Bootloop issues.

·        
Stock Firmware flashing can be
applied to either upgrade or downgrade your Infinix S5 PRO, S5 PRO (16+32), S5
PRO (48+40)

·        
It can be applied to unroot or
fix bugs on your Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40).

·        
To fix stutter or lag on your Infinix
S5 PRO, S5 PRO (16+32), S5 PRO (48+40)

·        
Stock firmware flashing is
effective in solving software issues of Infinix S5 PRO, S5 PRO (16+32), S5 PRO
(48+40).

·        
Stock firmware flashing can be
applied to revert back to the stock of your Infinix S5 PRO, S5 PRO (16+32), S5
PRO (48+40) to gain your warranty.

 

Just before you follow the tips below to upgrade or
downgrade your Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40). Do a backup of
your personal data:

·        
Setup an
auto or carry out a manual backup regularly of your Infinix S5 PRO, S5 PRO
(16+32), S5 PRO (48+40) following our guide here with
data or Wi-Fi connection.

·        
You can
also backup
your Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40) offline –
without internet connection following the steps provided here.

 

Tips to
Remember:

i.                    
This
update is meant for Infinix S5 PRO, S5 PRO (16+32), S5 PRO (48+40) users only.

ii.                  
Be sure
to try the other method of installing stock firmware if
yours have unlocked Bootloader issue.

iii.                 
TWRP
Recovery is a good alternative on how to upgrade your device if you don’t want
to do it the normal way. Here is a post on TWRP
Recovery.

iv.                
THEUPSPOT
is in no way responsible for any damage you might have on your Infinix S5 PRO,
S5 PRO (16+32), S5 PRO (48+40) while installing the update.

v.                  
The usual upgrade steps require the use of PC or Laptop to carry out the firmware
flashing.

vi.                
Ensure
that you have an updated and working USB drivers installed.

 

To request for download link, simply drop your
email in the comment box below.