How to Flash LG L80 or L80 Dual with Flash Tool, Firmware or Stock ROM

Earlier on when LG L80 or L80 Dual was released, we published a post to show our readers the features, specifications, and price of this most adorable LG device called L80 or L80 Dual. As well as how you can perform a hard or soft reset when your L80 or L80 Dual becomes unresponsive or should you choose to give to someone else with no data in it.

Usually, a hard or soft reset with the guide provided for LG L80 or L80 Dual is supposed to fix any possible software issue you might be experiencing with your LG L80 or L80 Dual or other similar android devices that the quick fixing guide for issues like camera, Bluetooth, SIM, Wi-Fi, YouTube or other malfunction could solve. But if you have tried that already and it failed then, you should probably opt-in for formatting, in this case, I will show you how to use LGUP Smart Tool to format your L80 or L80 Dual.

Just before you follow the tips below to upgrade or downgrade your LG L80 or L80 Dual. Do a backup of your personal data (if you can) before flashing:

• Setup an auto or carry out a manual backup regularly of your LG L80 or L80 Dual following our guide here with data or Wi-Fi connection.
• You can also backup your LG L80 or L80 Dual offline – without an internet connection following the steps provided here.

Steps on how to flash LG L80 or L80 Dual with LGUP Smart Tool:

First of all, visit our Firmware page and download the flash file for your:

• LG L80 or L80 Dual

Note: You will need to place your phone on charge with a working charger till you are sure it has charged above 50 percent before your formatting process commences else your phone might not wake up even after formatting.
Next, you will have to follow the instruction of using a LGUP Smart Tool as explained here below.

Easy Steps on how to flash LG L80 or L80 Dual Back to Its Factory State:

Step 1: First of all you will need to Download LG drivers.

Step 2: Next you should proceed to download the lasted version of LGUP (LG Smart Tool).

Step 3: Now you will have to Download and Install Stock ROM for LG L80 or L80 Dual.

Step 4: Now you will have to Install LGUP.msi on your PC where you will carry out the process.

Step 5: On your LG L80 or L80 Dual Press and hold the volume up key while you power off.

Step 6: Connect your LG L80 or L80 Dual to the computer by using USB cable.

Step 7: Switch your LG L80 or L80 Dual to the download mode.

Step 8: Launch the LGUP software on your PC.

Step 9: Next, proceed to select the Upgrade Option.

Make a choice to refurbish, upgrade in LGUP:
For upgrade to a new firmware, like moving from Marshmallow to Nougat, choose UPGRADE option.
For a full wipe and flash a clean firmware installation, and run again once you set it as above. You will notice now that the MM KDZ will still be showing in the FILE PATH section. Proceed to select REFURBISH and make sure BIN file is ticked.
For downgrade to Lollipop from Android Marshmallow, select REFURBISH and make sure BIN file is ticked.

Step 10: Now you will need to select your already downloaded KDZ firmware file.

Step 11: Flash Stock firmware on LG L80 or L80 Dual. After opening, Click the start button to start the installation.

Step 12: Now relax and watch as you wait for the process to finish.

Step 13: When complete your LG L80 or L80 Dual will reboot automatically. But if it doesn’t then you should power it on yourself.

Step 14: That’s all, enjoy your LG L80 or L80 Dual.

Tips to Remember:

• This update is meant for LG L80 or L80 Dual users only.
• THEUPSPOT is in no way responsible for any damage you might have on your LG L80 or L80 Dual while installing the update.
• The usual upgrade steps require the use of a PC or Laptop to carry out the firmware flashing.
• Ensure that you have updated and working USB drivers installed.